EasyManuals Logo

KAESER ASD T Series User Manual

KAESER ASD T Series
138 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #28 background imageLoading...
Page #28 background image
3.5.2 Safe Machine Operation
Information on safe conduct when handling the machine is found here.
Transport
Use suitable lifting gear that conforms to local safety regulations.
Allow transport only by personnel trained in the safe movement of goods.
Attach lifting gear only to suitable lifting points.
Be aware of the center of gravity to avoid tipping.
Make sure the danger zone is clear of personnel.
Installation
Install the machine in a suitable compressor room.
If installed outdoors, the machine must be protected from frost, direct sunlight, dust, rain and
splashing water.
Do not operate in areas in which specific requirements with regard to explosion protection are in
force.
For instance, the requirements of ATEX directive 94/9/EC "Equipment and Protective Systems
intended for use in Potentially Explosive Atmospheres".
Ensure adequate ventilation.
Ensure that required ambient conditions are maintained with regard to:
ambient temperature and humidity,
clean inlet air with no damaging contaminants,
inlet air free of explosive or chemically unstable gases or vapors,
inlet air free of acid/alkaline forming substances, particularly ammonia, chlorine or hydrogen
sulfide.
Do not position the machine in warm exhaust air from other machines.
Ensure accessibility so that all work on the machine can be carried out without danger or hin‐
drance.
Decommissioning, storage, disposal
Drain out fluids and dispose of according to environmental regulations.
These include, for example, compressor oil and cooling water.
Give refrigerant only to authorized groups for disposal.
Dispose of the machine in accordance with local environmental regulations.
3.5.3 Organizational Measures
Designate personnel and their responsibilities.
Give clear instructions on reporting faults and damage to the machine.
Give instructions on fire reporting and fire-fighting measures.
3.5.4 Danger Areas
The table gives information on the areas dangerous to personnel.
Only authorized personnel may enter these areas.
3 Safety and Responsibility
3.5 Dangers
18
Service Manual Screw Compressor
ASD T Tri-Voltage 9_5721 06 USE

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the KAESER ASD T Series and is the answer not in the manual?

KAESER ASD T Series Specifications

General IconGeneral
ModelASD T Series
CategoryCompressor
Frequency50/60 Hz
Drive SystemDirect Drive
CoolingAir-cooled
TypeRotary Screw Compressor
Cooling SystemAir-cooled
Control SystemSigma Control 2
PressureUp to 15 bar
Integrated DryerYes
Voltage400 V
WeightVaries by model
Drive MotorIE3 Premium Efficiency

Related product manuals