KAESER ASD T Series User Manual

Fig. 18 Label: Changing the display language
1 If required:
Unlatch the EMERGENCY STOP button.
2 If required:
Acknowledge alarm message.
3 Depress the «escape» key for 5 seconds to
change to the main menu.
4 Press the «UP» key 8 times.
5 Press «Enter» to enter language selection.
6 Press the «UP» or «DOWN» keys as often
as necessary to reach the required language.
7 Press «enter» to select the language.
8 Depress the «escape» key for 5 seconds to
change to the main menu.
➤ Change the display language on SIGMA CONTROL as required.
7 Initial Start-up
7.10 Changing the display language
9_5721 06 USE
Service Manual Screw Compressor
ASD T Tri-Voltage
45

KAESER ASD T Series Specifications

General

Model	ASD T Series
Category	Compressor
Frequency	50/60 Hz
Drive System	Direct Drive
Cooling	Air-cooled
Type	Rotary Screw Compressor
Cooling System	Air-cooled
Control System	Sigma Control 2
Pressure	Up to 15 bar
Integrated Dryer	Yes
Voltage	400 V
Weight	Varies by model
Drive Motor	IE3 Premium Efficiency