2. MAIN INFORMATIONS
There are vehicle identification stickers
on the vehicle.
2.1. Vehicle Identification Plate
Vehicle identification plate (1) is located
on the right side of the vehicle.
You may find the following information’s
on this plate;
Vehicle Identification Plate
1- Type approval number
2- VIN number
3- Technical total capacity
4- Technical king pin capacity
5- Technical an axle capacity
6- Technical total axle capacity
7- Nationally approved total capacity
8- Nationally approved king pin capacity
9- Nationally approved an axle capacity
10- Nationally approved total axle
capacity
11- Vehicle Type
2.2. Brake Data Plate
There is a brake data plate on the ve-
hicle which is equipped with an EBS
system.
You may see this information on this
plate.
Vehicle Identification Plate
1
Empty vehicle(without load)
2 Loaded vehicle
3
Axle lifting
4 Brake chamber data’s
5 References
6 ABS Sensor Placement
7
Extra functions, Pin / GIO
Matrix
8 IN/OUT-Connections
2.3. VIN (Chassis) Numbers
The VIN (chassis) number (3) is located
on the right side of the vehicle and
marked with a different color than the
chassis color.
2.4. Warranty and Responsibility
Our trailers, semi-trailers and truck on-
board applications are manufactured in
To Next Page
