EasyManua.ls Logo

Kässbohrer LOW-LOADER Series - Hubodometer; Hydraulic Steering System; Commisioning and Operation

Kässbohrer LOW-LOADER Series
84 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
27 / 84
For more detailed information
about your axles, please refer
to manufacturers manual gi-
ven to you at the time of
delivery.
If the axles are used other
than the conditions specified
in the manufacturers man-ual
or if their maintenance is inter-
rupted, your vehicle may be
out of warranty.
If the vehicle is equipped with
the emergency brake bellows,
apply the parking brake after
checking the brake drum tem-
peratures. Never apply the
parking brake when the drums
are very hot.
3.5.1. Hubodometer
Hubodometers show the distance trav-
eled by the vehicle in kilometers or
miles.
The unit of the hubodometer is written on
the hubodometer. It is adjusted accord-
ing to the tire diameter.
Analog Hubodometer
Digital Hubodometer
3.6. Hydraulic Steering System
3.6.1. Commisioning and Operation
In order for the trailer to work properly, all
air couplings and electrical sockets be-
tween the tractor and the trailer must be
connected to the relevant couplings and
sockets on the trailer. In order for the
Steering System and the pump to work,
the following connections must be made.
The lighting sockets 24N (ISO
1185), 24S (ISO 3731) or 15 Pin
ADR (ISO 12098) located between
the tractor and the trailer must be
connected to the relevant sockets
on the trailer.
Elektrical sockets
The battery supply socket (NATO /
REMA) on the trailer must be con-
nected to the truck's battery supply.

Table of Contents

Related product manuals