67 / 84
• After cleaning the vehicle, carefully
lubricate the greasing points with a
grease gun. This is important to pre-
vent dirt and moisture from entering
various parts of the vehicle.
• Clean the interior and exterior of the
vehicle every time you return.
Do not use flammable liquids
or toxic sub-stances for
cleaning.
5.8. Work Lamp
There is a waterproof LED lamp to be
used in low-light environments or in the
dark. The work lights in the bumper area
are activated by the truck's reverse gear
signal.
Work lamp
Work Lamp
In the gooseneck area of the vehicle, 1
or 2 LED lamps are given as an option.
By activating the fog line of the truck, the
working lamps are controlled with the
button box located in the gooseneck
area.
Gooseneck Work Lamps
Button box
To Next Page