Kässbohrer LOW-LOADER Series - Page 4

5.6. Important Technical Considerations ........................................65
5.6.1. Fire Extinguisher...............................................................65
5.6.2. Wheel Chocks ...................................................................65
5.6.3. Modifications on the Trailer..............................................65
5.6.4. Air Leakage.......................................................................65
5.6.5. Considerations For the Environment ................................65
5.7. Cleaning the Vehicle ................................................................66
5.8. Work Lamp...............................................................................67
6. TRANSPORTATION SOLUTION
6.1. Container Transportation..........................................................68
6.1.1. Container Lock..................................................................68
6.2. Heavy Machinery Transport.....................................................68
7. LOADING AND LOAD SECURITY
7.1. Safety Instructions....................................................................69
7.1.1. Load Security ....................................................................69
7.2. Load Distribution and Load Limits of Truck-Semi-Trailer
Combination...................................................................................70
7.2.1. Downlink Load Lashing....................................................70
7.3. Lashing Rings...........................................................................72
7.4. Loading Table...........................................................................72
7.5. Loading Crane..........................................................................72
8. INSPECTION AND MAINTENANCE
8.1. General Information .................................................................74
8.2. Disposal of Used Materials ......................................................74
8.3. Conditions of the Place where Service and Maintenance
Operations are Made ......................................................................74
8.4. Periodic Maintenance and Controls .........................................74
8.5. General Maintenance Program.................................................74
8.6. Hydraulic and Pneumatic Hoses and Connections...................76
8.7. Tightening Torques for ISO Standard Bolts.............................76
8.8. King Pin ...................................................................................76
8.8.1. King Pin Assembly Bolt....................................................77
8.8.2. Changement of King Pin...................................................77
8.8.3. King Pin Maintenance.......................................................78
8.9. King Pin Steering Center Bearing Control...............................78
8.10. The Control of Steering Chock ..............................................78
8.11. Maintenance of Filters in Connection Couplings...................79
8.12. The Brakes and The Brake System ........................................79