45 / 84
Pump start button
Hydraulic control levers
4)Engage the vehicle’s parking brake
Red park button
5)Remove the safety pin, unlock with the
screw lever on the gooseneck. If it is diffi-
cult to unlock, move the vehicle to the
right or left.
The location of screw lever
Opening the lock
6)Extend the vehicle past the slot in front
of the desired extension.
7)Close the lock.
Closing the lock
8) Make sure that the lever is closed by
pushing the lever of the open lock with
your foot. When the locks come into the
slot, the locks will fit into the slot. If one
of the locks is closed and the other is
not, move the vehicle to the right or left
with the tractor to ensure that the lock is
seated and insert the safety pin.
To Next Page