Load management program
53 / 156
The Wallbox is operational and the power switch is closed.
Degraded:
Some Wallbox functions are not working (e.g. the Wallbox is derated
because of high temperature).
Offline:
The Wallbox is not working at all.
Shows the state of the vehicle connected to the selected Wallbox.
Display values:
No Vehicle:
No vehicle is connected to the Wallbox.
Plugged In:
A vehicle is plugged in.
Ready to charge:
The vehicle is ready to consume energy.
Charging:
There is an active charging session, the Wallbox is operational and
the vehicle is not blocked.
Decimal error code reported by the Wallbox in case the Wallbox is in an
error state.
Typical workflow: Viewing Wallbox details
Press the icon representing the Wallbox at the home screen. The Wallbox monitoring screen
belonging to the Wallbox appears.
If the general information is not sufficient, more details can be seen at other tabs of the screen.
They can be reached by pressing [>] or [<] at the toolbar or by clicking at the tab headers shown
at the content area of the screen.
The following information can be viewed and analyzed in addition to the general information. Most
of this information might be of interest when troubleshooting.
Wallbox settings:
Details about the settings of the Wallbox. This includes settings entered at the DIP switches of
the Wallbox and information stored inside the wallbox.
Wallbox operation:
Details about the current operation of the Wallbox.
Vehicle overview:
Details about the vehicle attached to the wallbox (mostly only available for electric vehicles using
ISO 15118).
Because most data shown at the screens are static, the screens will not be refreshed.
Up to date information can be loaded by clicking on the [Refresh] button .
Return to the home screen by clicking on the [HOME] button .
To Next Page
Loading...
