Load management program
99 / 156
Typical workflow: Authorize Charging Sessions
Press the [Management] button in the toolbar. The Management screen (Charging Session
Management) appears.
Select the charging session to be authorized, enter the approval reason and press the button
[Authorize].
To optionally view the details about the authorization, press the [Refresh] button in the toolbar at
the bottom of the screen.
Return to the home screen by clicking on the [HOME] button .
Typical workflow: Manage Charging Sessions
Press the [Management] button in the toolbar. The Management screen (Charging Session
Management) appears.
This screen provides an overview of the ongoing charging sessions. By selecting a charging ses-
sion and pressing one of the buttons below the table showing the charging sessions, manage-
ment operations (blocking, unblocking, authorization) can be performed and details about the
charging sessions can be reviewed.
If the button [View Details] is pressed, detailed information about the charging session that has
been selected is shown.
If the button [Unblock] is pressed, a blocked charging session starts charging again. This button
doesn’t work for charging sessions that have not yet been authorized.
If the button [Block] is pressed, a working charging session stops charging. This button doesn’t
work for charging sessions that have not yet been authorized.
If the button [Authorize] is pressed, a charging session that has not yet been authorized is au-
thorized.
Because most data shown at the screens are static, the screens will not be refreshed.
Up to date information can be loaded by clicking on the [Refresh] button .
Return to the home screen by clicking on the [HOME] button .
To Next Page
Loading...
