Keithley 6482 - Page 202

6482-901-01 Rev. A / August 2012 Return to Section Topics 16-9
Model 6482 Dual-Channel Picoammeter / Voltage Source Reference Manual Section 16: SCPI Command Reference
Table 16-6
SOURce command summary
Command Description
Default
parameter SCPI
:SOURce[1]
:CLEar
[:IMMediate]
:AUTO
:MODE <name>
:MODE?
:DELay <n>
:AUTO <b>
:AUTO?
:DELay?
:GCONnect <b>
:GCONnect?
:VOLTage
:MODE <n>
:MODE?
:RANGe <n>
:AUTO <b>
:AUTO?
:RANGe?
[:LEVel]
[:IMMediate]
[:AMPLitude]
<n>
[:AMPLitude]?
:TRIGgered
[:AMPLitude]
<n>
[:AMPLitude]?
Path to control channel 1 source:
Path to clear source:
Turn selected source off.
Automatically turn source on/off.
Specify auto on/off mode (ALWays or TCOunt).
Query auto on/off mode.
Specify settling time (in sec): 0 to 9999.999.
Enable or disable automatic settling time.
Query state of automatic settling time.
Query source settling time.
Enable or disable ground connect mode.
Query ground connect state.
Path to configure V-Source:
Select V-Source mode (FIXed, SWEep, or LIST).
Query V-Source mode.
Select fixed V-Source range; -30 to 30 (10 or 30).
Enable or disable autoranging.
Query state of autoranging.
Query V-Source range setting.
Set V-Source level (in volts):
Set specified voltage level immediately:
Specify voltage level; -30 to 30.
Query voltage level.
Set specified voltage level when triggered:
Specify voltage level; -30 to 30.
Query voltage level.
OFF
ALWays
0.001
OFF
FIXed
10
ON
0
0
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9