16-54 Return to Section Topics 6482-901-01 Rev. A / August 2012
Section 16: SCPI Command Reference Model 6482 Dual-Channel Picoammeter / Voltage Source Reference Manual
CODE[:NEXT]?
:SYSTem:ERRor:CODE[:NEXT]?Read oldest error (code only)
Description This command is identical to the [:NEXT]? command, except only the code is
returned. The message itself is not returned. The error is cleared from the queue.
CODE:ALL?
SYSTem:ERRor:CODE:ALL? Read all errors (codes only)
Description This query command is identical to the :ALL? command, except only the codes
are returned. The actual messages are not returned. All errors are cleared from
the queue.
CLEar
:SYSTem:CLEar Clear error queue
Description This action command is used to clear the error queue of messages.
Simulate key presses
KEY
:SYSTem:KEY <NRf> Simulate key-press
Parameters <NRf> = 1 RANGE key
2EDIT key
3EDIT key
4 MENU key
5 DELTA key
6 FILTER key
7 SPEED key
8 CHANNEL SELECT key
9 AUTO key
10 EDIT key
11 EXIT key
12 SRC1 key
13 LIMITS key
14 STORE key
15 MSR1 key
16 DISPLAY TOGGLE key
17 RANGE key
18 ENTER key
19 SRC2 key
20 TRIG key
21 RECALL key
22 MSR2 key
23 LOCAL key
24 ON/OFF key
25 -----
26 EDIT key
27 SWEEP key
28 CONFIG key
29 RATIO
30 REL key
31 DIGITS key
To Next Page
Loading...
