Getting Started
19
TCE Terminal connections
1 + I1 current loop 1 positive terminal
2 - I1 current loop 1 negative terminal
3 + I2 current loop 2 positive terminal
4 - I2 current loop 2 negative terminal
5 F out Frequency / pulse output
6 CTL OUT Control output
7 CTL IN Control input
8 GND Ground (for pins 5 through 7)
20 COMMON Common (for pins 21 and 22)
21 - RS485 RS485 negative line
22 +RS485 RS485 positive line
31 FF- Foundation fieldbus, negative rail
32 FF+ Foundation fieldbus, positive rail
24V DC Supply
50 + 24 VDC Positive supply voltage (24 VDC)
51 - 24 VDC Supply ground
52 PE Protective Ground
100 – 240V AC Supply
90 L Life (AC voltage)
91 N Neutral
52 PE Protective Ground
To Next Page
Loading...
Need help?
General
