Listings
82
7 Listings
7.1 Warranty
KEM warrants material and production for a period of 12 months after installation and start up, max. 18
months from delivery date.
7.2 Certifications and compliances
Category Standards or description
EC Declaration of Conformity -
EMC
Meets intent of Directive 2004 / 108 / EEC for Electromagnetic Compatibility.
Compliance is given to the following specifications as listed in the Official Journal
of the European Communities:
EN 61326 / 2006 EMC requirements for Class A electrical
equipment for measurement, control and
laboratory use, including Class A radiated
and Conducted Emissions
1
and Immunity
1
.
IEC 61000-4-2 /2009 Electrostatic Discharge Immunity
(Performance criterion B)
IEC 61000-4-3 / 2008 Radiated RF Electromagnetic Field
Immunity (Performance criterion B)
IEC 61000-4-4 / A1-2009 Electrical Fast Transient / Burst Immunity
(Performance criterion B)
IEC 61000-4-5 / 2007
2
Power Line Surge Immunity (Performance
criterion B)
IEC 61000-4-6 / 2009 Conducted RF Immunity (Performance
criterion B)
IEC 61000-4-11 / 2005
2
Voltage Dips and Interruptions Immunity
(Performance criterion B)
Australia / New Zealand
Declaration of Conformity-
EMC
Complies with the Radiocommunications Act and demonstrated per EMC
Emission standard
1
AS/NZS 2064 Industrial, Scientific, and Medical
Equipment: 1992
FCC EMC Compliance Emissions comply with the Clas A Limits of FCC Code of Federal Regulations
47, Part 15, Subpart B
1
.
1
Compliance demonstrated using high-quality shielded interface cables
2
Applies only to units with AC mains supply instead of or additional to the SELV supply
To Next Page
Loading...