Manual Operation
41
4 Manual Operation
4.1 Power On Sequence and Principles of Manual Control
The power up sequence gives the following information, each for about 2 second:
CORIOLIS
TRICOR
TCE8000
This gives the type of electronics. At the time being the types TCE8001 (low power) and TCE8011 (high power)
are available.
SENSOR TYPE
TCM28k
This gives the sensor size. At the time being Sensors from TCM0300 (300kg/h max.) to TCM65k (65,000kg/h
max.) are available
SW MAIN
Rev.: V2.00
This indicates the SW version of the main processor.
SW DISPLAY
Rev.: V2.00
This indicates the SW version of the display processor.
READY
If changes to the settings were made before the last power down and not saved to the backup EEPROM, the
following message appears:
To Next Page
Loading...
Need help?
General
