Manual Operation
50
4.5.4 DISPLAY Menu
Select in the main menu
MAIN MENU
DISPLAY
UP DOWN EXIT
Press “P”. The display shows
DISPLAY MENU
FLOW DISPLAY
UP DOWN EXIT
The following submenus are available:
FLOW DISPLAY:
Setting the flow units, the flow decimal point and a flow filter for the display.
TOTAL DISP:
Setting the total and batch units and the total and batch decimal point.
DENS DISP:
Setting the density units.
TEMP DISP:
Setting the temperature units.
DISP MODE:
Setting the content of the 2 display views, the mode (static or alternating) and the backlight.
4.5.4.1 FLOW DISPLAY menu
In the submenu “FLOW DISPLAY” the flow dimensions, the flow decimal point and the flow filter for the display
can be set.
DISPLAY MENU
FLOW DISPLAY
UP DOWN EXIT
P
SET FLOW DISPLAY
FLOW UNITS
UP DOWN EXIT
Use the keys “UP” and “DOWN” to select the desired submenu and confirm with “P” or skip with “EXIT”.
The following submenus are available:
FLOW UNITS:
Setting the flow units.
FLOW DP:
Setting the flow decimal point.
DISP FILTER:
Setting the display filter.
To Next Page
Loading...
Need help?
General
