Kemper 345plus - Page 56

Attaching to a KRONE Forage Harvester
KM00321,000053E -19-21JUN16-6/11
Continued on next page KM00321,000053E -19-21JUN16-7/11
7. When rollers (A) on the oscillating frame are below
pipe (B), lift the feed roll housing up and attach the
rotary harvesting unit.
8. Extend the locking pins (C) and latch the rotary
harvesting unit.
A—Rollers on Oscillating
Frame
B—Pipe
C—Locking Pin
KM277385 —UN—21NOV16KM285508 —UN—21NOV16
9. Only when attaching for the first time:
Adjust lower plates (A) using slots (B) so that the
locking pins (C) on the forage harvester can be latched.
A—Plate
B—Slots
C—Locking Pin
KM285509 —UN—21NOV16
22-5
031519
PN=56