X5 FastMig
Operating manual - EN
2.15 How to get welding programs
The use of additional welding programs and Wise features is possible with the X5 FastMig Synergic equipment.
The welding programs and Wise features (WiseSteel, WiseFusion and WisePenetration+) for each individual X5 FastMig
equipment are installed at the time of purchase according to your specific welding requirements. This can be done by
your local Kemppi dealer. Welding programs and Wise features can also be added later on.
For more information on the available X5 FastMig welding program options and installing the welding programs as well
as software updates, contact your local Kemppi dealer or go to Kemppi.com.
The X5 FastMig equipment is also available with a welding program work pack preinstalled. These work pack versions
cover the basic welding tasks with the automatic 1-MIG welding process.
The manual MIG process doesn't require additional welding programs.
For applying welding programs on your X5 FastMig equipment, refer to "Auto control panel: Applying welding pro-
grams" on page92.
© Kemppi
67
1920960 / 2144
To Next Page
Loading...
Need help?
General
