X5 FastMig
Operating manual - EN
3.6 Lifting X5 equipment
If you need to lift X5 FastMig equipment, pay special attention to the safety measures. Also follow the local regulations.
The X5 FastMig equipment can be lifted with a mechanical hoist as a whole only when the equipment is installed
securely on a dedicated transport unit.
DO NOT attempt to lift the equipment with a hoist from the handle.
If a gas bottle is installed on cart, DO NOT attempt to lift the cart with the gas bottle in place.
4 wheel cart:
1. Ensure that the welding equipment is properly secured to the cart.
2. Connect the 4-legged chain or straps from the hoist hook to the four lifting points on the cart on both sides of the
welding equipment.
© Kemppi
99
1920960 / 2144
To Next Page
Loading...
Need help?
General
