X8 MIG WELDER 2.5 Operation
Note:
If you have installed WeldEye, it saves the data as unsuitable use, even if the welding job
requires such values.
Figure 17: Values outside the range specified by WPS
Settings view
Settings displays all the welding parameters and other settings of the selected program. The
contents under the titles are collapsed by default. Press the green button to expand the columns.
There are two modes, Basic and Advanced. This section describes the Settings view in the
Advanced mode.
OPERATING MANUAL | EN 100
©
KEMPPI 2017 | 1817
To Next Page
Loading...
