Kemppi X8 User Manual

X8 MIG WELDER 2.4 Installation
1-2 mm
8.
Attach the guide nut at the tip of the sleeve.
9.
Re-assemble the neck and tighten the neck tightener to secure.
Changing neck (gas-cooled gun)
You can change the neck easily, without tools.
1.
Turn the neck tightener half a turn counter-clockwise to loosen it, and pull the neck out.
OPERATING MANUAL | EN 78
©
KEMPPI 2017 | 1817

Kemppi X8 Specifications

General

Brand	Kemppi
Model	X8
Category	Welding System
Language	English