KERN PLE - Overview of Display

PLE-BA-e-0812
16
8.3 Overview of display
No. Display Description
1. FIL
Filter setting
2. bAud
RS 232 interface speed
3. HiLo
+/- tolerance with respect to reference weight
4. rEPL
Automatic display printout
5. StAb
Printing will be started as soon as the stability
display appears
6. Auto
Monitoring weight display at 0
7. t1
Automatic cutout
8. toP
Maximum weight storage
9. Add
Totalising symbol
10. AnLs
Symbol for animal weighing function
11.
tArE
Symbol for PRE-TARE function (pre-tare
deduction)
12. →0←
Balance zero display
13. [ ]
Stability display
14. PCS
Symbol for "Piece-counting" mode
15. g (kg)
Symbol for "Weighing" mode
16.
Battery very low.
17. Net
Tara symbol
18.
+/- tolerance with respect to reference weight entry
of lower limit or weight below tolerance
19.
+/- tolerance with respect to reference weight within
prescribed limits
20.
+/- tolerance with respect to reference weight entry
of upper limit or weight above tolerance