KERN PLE - Menu Function P2 Prnt - RS 232 C Parameter; Navigation in the Menu

PLE-BA-e-0812
51
14.2 Menu function "P2 Prnt" - RS 232C Parameter
Menu overview
P2.1 Pr_n Setting data output type
P2.2 S_Lo Entering minimum weight
P2.3 bAud Setting baud rate
P2.4 S_rS Setting transmission parameter
14.2.1 Navigation in the menu
Ö Press the
and buttons simultaneously in Weighing mode and the first
Menu point "P2 Prnt" will appear
Ö Press the
button and "P2 Prnt" will appear
Ö Confirm by pressing the button and the first submenu "2.1 Pr_n" will appear
Ö For further selection press the button until the required setting appears
2.1 Pr_n →2.2 S_Lo →2.2 Pr_n → 2.3 bAud →P2.4 S_rS
Ö Press the button and the current setting will flash
Ö Press the button until the required setting appears
Ö Confirm setting with . Weighing balance returns to menu. If desired, carry
out settings for further menu items as described above.
Return to weighing mode
Ö Press the
button repeatedly until the "SAVE"? inquiry appears.
Confirm the inquiry by pressing the
button to save the changes and to
return to Weighing mode.
-or-
press the button to return to Weighing mode without saving.