KERN PLE - 14 Data Output Rs 232 C; Pin Allocation of the Balance Output Plug (Front View)

PLE-BA-e-0812
50
14 Data output RS 232 C
Technical data:
• Baud rate -2400 - 38400 Baud
• Databits -7, 8
• Stop bits -1, 2
• Parity bit -no, even, odd
• For operation with interface faultless operation is only ensured with the correct
KERN – interface cable (max. 2m)
Transfer modes:
• Manually after pressing the PRINT key
• Continuously, according to setting
• Automatically according to stability display
• Prompted by external device (For remote control commands see chpt.
14.3)
Output conditions:
• stable – output in the event of stable weighing value
• any – sequential output by pressing the PRINT button (Marks in the printout:
<?>)
14.1 Pin allocation of the balance output plug (front view)
5 1
9 6
Pin 2: Receive data
Pin 3: Transmit data
Pin 5: Signal ground