KERN PLE - 9 The Menu; List of Menu Functions

PLE-BA-e-0812
17
9 The menu
The individual elements of the Menu system (Main menu, Submenu and Settings) are
displayed with a P Number and an abbreviation.
The number abbreviations for the menus can be found in the List of Menu Functions
below.
9.1 List of Menu Functions
P1 rEAd [Basic settings, see chap. 11]
P1.1 FiL | 2 Filter settings
P1.2 Auto | YES Auto Zero
P1.3 tArA | no Tare function
P1.4 Fnnd | no Median Filter
P2 Prnt [RS 232 Parameter, see chap. 14.2]
P2.1 Pr_n | StAb Setting data output type
P2.2 S_Lo | Entering minimum weight
P2.3 bAud | 9600 Setting baud rate
P2.4 S_rS | 8d1SnP Setting transmission parameter
P3 Unit [Weighing units, see chap. 10.4]
P3.1 StUn | kg Setting standard weighing unit
P4 Func [Operating modes, see chap. 13]
P4.1 FFun | ALL selection enabled operating modes
P4.2 Funi | No Weighing units switch-over
P4.3 PcS | No Parts counting
P4.4 HiLo | No Tolerance weighing
P4.5 PrcA | No Percentage weighing (by means of weighing)
P4.6 Prcb | No Percentage weighing (by manual entry)
P4.7 AtAr | No Automatic taring
P4.8 toP | No Peak value function
P4.9 thêm vào No Adding
P4.A AnLS | No Animal weighing
P4.b tArE | No PRE-TARE
P5 othr [Further useful functions, see chap. 12]
P5.1 bL | Auto Display background illumination
P5.2 bLbt | 50 Intensity of backlighting
P5.3 bEEP | YES Key sound
P5.4 t1 | no AUTO-OFF
P5.5 CHr6 | no Rechargeable battery charging function
switch-off
P6 CAL [Adjustment, see chap. 7]
P6.1 St_u | not documented
P6.2 uCAL | Adjustment