PLE-BA-e-0812
42
13.5 Automatic Taring (Function P4.7 AtAr
This function is to be used for faster calculation of the net weight, in case the tare
load changes for each weighing.
• Call function
⇒
⇒
⇒
1. Deposit weighing receptacles
2. The receptacle weight is automatically saved as tare weight, the zero
display and NET symbol will appear
3. Weigh goods and read result
4. Remove goods and receptacle
5. Deposit next weighing receptacle and repeat Steps 2 - 4.
• Return to weighing mode
Press
button repeatedly
Note:
Ensure that the input of the minimum weight (For setting see chap. 14.2.3) is smaller
than the weight of the weighing receptacle otherwise the weighing receptacle will not
be tared automatically.
To Next Page
Loading...
