PLE-BA-e-0812
35
13.2 Quantities (Function P4.3 PcS)
Before the balance can count parts, it must know the average part weight (i.e.
reference). Proceed by putting on a certain number of the parts to be counted. The
balance determines the total weight and divides it by the number of parts, the so-
called reference quantity. Counting is then carried out on the basis of the calculated
average piece weight.
As a rule:
The higher the reference quantity the higher the counting exactness.
• Call add-up function
⇒
⇒
Select the required reference quantity by pressing the button.
• Reference piece number 10, 20 or 50
⇒
⇒
⇒
⇒
Confirm selected reference quantity (e.g. 20) by pressing the button.
To Next Page
Loading...
