KERN PLE - Call-Up of Last Saved Display Value

PLE-BA-e-0812
46
13.7.1 Call-up of last saved display value
In the event of disruption to the totalising process e.g. by disconnection from the
mains, the last saved display value can be called up as follows:
⇒
⇒
⇒
If "P" pops up in the display after pressing the button, the balance is ready for a
further totalising process.
If "unLoAd" pops up in the display after pressing the button, unload the
weighing plate and wait for the zero display with symbol "P". Then the balance is
ready for a further totalising process.
• Return to weighing mode
Press the button and ESC appears,
Press the button to return to Weighing mode or press the button to return
to Totalising mode.