KERN PLE - Continuous Output

PLE-BA-e-0812
57
14.5 Continuous output
The balance may be operated in a mode enabling continuous output of weighing
result. This mode can be turned on/off by commands via RS232. (For settings see
chap. 14.2.2).
 C1 CR LF - Continuous transfer in standard weighing unit on
 C0 CR LF - Continuous transfer in standard weighing unit off
Data record format:
1 2 3 4 5 6
7-
15
16 17 18 19 20 21
S
I
Blank Stability indicator Blank Signs Weight Blank Unit
CR
LF
 CU1 CR LF - Continuous transfer in current weighing unit on
 CU0 CR LF - Continuous transfer in current weighing unit off
Data record format:
1 2 3 4 5 6
7-
15
16 17 18 19 20 21
S
U
I
Stability indicator Blank Signs Weight Blank Unit
CR
LF
Stability indicator [blank space], if stable
[?] if not stable
[^] if overload
[v] if underload
Presign: [blank space] if positive
[-] if negative
Weight: 9 signs, right justified
Unit: 3 signs, left justified