KERN PLE - Page 45

PLE-BA-e-0812
45
Ö Add and weigh more parts if needed as described above. Please note that the
balance must be unloaded between the individual weighing procedures. This
process can be repeated as often as necessary until the display range of the
balance is exhausted (Display "5-FULL").
Ö Upon completion of the last individual weighing process, the total (TOTAL) of all
the weighing processes will be output to the optional printer by pressing the
button once more.
(1) 1912 kg
(2) 1912 kg
-------------------------------
TOTAL: 3824 kg
If "P" pops up in the display after pressing the button, the balance is ready for a
further totalising process.
If "unLoAd" pops up in the display after pressing the button, unload the
weighing plate and wait for the zero display with symbol "P". Then the balance is
ready for a further totalising process.
• Return to weighing mode
Press the button and ESC appears,
Press the button to return to Weighing mode or press the button to
return to Totalising mode.