SYSTem:LOCal
SYSTem:REMote
These commands place the instrument in either the local or remote mode.
Parameter Typical return
(none) (none)
Places the instrument in local mode: SYST:LOC
Places the instrument in remote mode: SYST:REM
– In the LOCal mode, all keys onthe front panel are fully functional.
– In the REMote mode, all keys on the front panel are disabled except "Local" ([Save Recall] key). Also, the knob and
the arrow keys are enabled.
Keysight DAQ970A/DAQ973A Programming Guide 311
2 SCPI Programming
To Next Page
Loading...
