Keysight Technologies DAQ970A User Manual

Error code Error message
-256 File name not found
-257 File name error; unknown file extension
-257 File name error; relative path not allowed
-257 File name error; path too long
-257 File name error; path name missing
-257 File name error; path is a folder name
-257 File name error; not a folder name
-257 File name error; invalid character in name
-257 File name error; folder not empty
-257 File name error; folder is default folder
-257 File name error; file too large
-257 File name error; file or folder already exists
-257 File name error; drive name missing or not recognized
-257 File name error; access denied
-257 File name error
-258 Media protected
-260 Expression error
-261 Math error in expression
-290 Memory use error
-291 Out of memory
-292 Referenced name does not exist
Device-Specific Errors (-300...)
Error code Error message
-300 Device specific error
-310 System error; software initialization failed
-310 System error; out of memory
-310 System error; internal software error
-310 System error: slave processor received unexpected signal
-310 System error: slave processor aborted due to error
-310 System error
-311 Memory error
-312 PUD memory lost
-312 PUD memory error
-313 Calibration memory lost; due to firmware revision change
-313 Calibration memory lost
Keysight DAQ970A/DAQ973A Programming Guide 355
3SCPI Error Messages

Keysight Technologies DAQ970A Specifications

General

Brand	Keysight Technologies
Model	DAQ970A
Category	Multiplexer
Language	English