Keysight Technologies DAQ970A - Query Errors (-400...)

Error code Error message
-314 Save/recall memory lost; memory corruption detected
-314 Save/recall memory lost; due to firmware revision change
-314 Save/recall memory lost
-315 Configuration memory lost; memory corruption detected
-315 Configuration memory lost; due to firmware revision change
-315 Configuration memory lost
-320 Storage fault
-321 Out of memory
-330 Self-test failed
-340 Calibration failed
-350 Queue overflow
-350 Error queue overflow
-360 Communication error
-363 Input buffer overrun
Query Errors (-400...)
Error code Error message
-400 Query error
-410 Query INTERRUPTED
-420 Query UNTERMINATED
-430 Query DEADLOCKED
-440 Query UNTERMINATED after indefine response
Network Errors (+100...)
Error code Error message
100 Network Error
110 LXI mDNS Error
111 Channel list: slot number out of range
112 Channel list: channel number out of range
113 Channel list: empty scan list
Instrument Errors (+200...)
Error code Error message
201 Memory lost: stored state
202 Memory lost: power-on state
356
Keysight DAQ970A/DAQ973A Programming Guide
3SCPI Error Messages