4Plug-in Modules Reference
DAQM900A 20-Channel FET Multiplexer Module
DAQM901A 20-Channel Armature Multiplexer Module
DAQM902A 16-Channel Reed Multiplexer Module
DAQM903A 20-Channel Actuator/General-Purpose Switch Module
DAQM904A 4×8 Two-Wire Matrix Switch Module
DAQM905A Dual 1:4 RF Multiplexer (50 Ω) Module
DAQM907A Multifunction Module
DAQM908A 40-Channel Single-Ended Multiplexer Module
DAQM909A 4-Channel 24-Bit Digitizer Module
This chapter describes the simplified schematic diagrams and SCPI commands used on each plug-
in modules. Refer to DAQ970A/DAQ973A User's Guide for further details on each
plug-in modules.
366
Keysight DAQ970A/DAQ973A Programming Guide
4Plug-in Modules Reference
To Next Page
Loading...
Need help?
General
