Keysight Technologies DAQ970A - Miscellaneous Errors (+300..., +400..., and +500...)

Error code Error message
203 Memory lost: stored measurements
204 Memory lost: time and date
251 Unsupported temperature transducer type
261 Not able to execute while scan initiated
262 Not able to abort scan
263 Not able to execute while instrument is measuring
264 Not a scannable channel
281 Not able to perform on more than one channel
291 Not able to recall state: it is empty
292 State file size error
293 State file corrupt
294 Preference file size error
295 Preference file corrupt
Miscellaneous Errors (+300..., +400..., and +500...)
Error code Error message
301 Module currently committed to scan
302 No module was detected in this slot
303 Module is not able to perform requested operation
304 Does not exist
305 Not able to perform requested operation
306 Part of a 4-wire pair
307 Incorrectly configured ref channel
308 Channel not able to perform requested operation
309 Incorrectly formatted channel list
310 Operation refused because channel is locked open
311 No channel in range able to perform requested operation
312 Channel currently committed to scan
320 DMM communication error: boot message queue overflowed
320 DMM communication error: command returned error status
320 DMM communication error: communication restart failed
320 DMM communication error: communication restart succeeded
320 DMM communication error: data packet error detected
320 DMM communication error: read error detected
320 DMM communication error: write error detected
330 Data logging halted due to slow USB stick write speed
Keysight DAQ970A/DAQ973A Programming Guide 357
3SCPI Error Messages