Command Errors (-100...)
Error code Error message
-100 Command error
-101 Invalid character
-102 Syntax error
-103 Invalid separator
-104 Data type error
-105 GET not allowed
-108 Parameter not allowed
-109 Missing parameter
-110 Command header error
-111 Header separator error
-112 Program mnemonic too long
-113 Undefined header
-114 Header suffix out of range
-120 Numeric data error
-121 Invalid character in number
-123 Numeric overflow
-123 Exponent too large
-124 Too many digits
-128 Numeric data not allowed
-130 Suffix error"
-131 Invalid suffix
-134 Suffix too long
-138 Suffix not allowed
-140 Character data error
-141 Invalid character data
-144 Character data too long
-148 Character data not allowed
-150 String data error
-151 Invalid string data
-158 String data not allowed
-160 Block data error
-161 Invalid block data
-168 Block data not allowed
-170 Expression error
352
Keysight DAQ970A/DAQ973A Programming Guide
3SCPI Error Messages
To Next Page
Loading...
Need help?
General
