Keysight Technologies DAQ970A - Sense:]{Resistance|Fresistance} Subsystem

To Next Page

To Previous Page

[SENSe:]{RESistance|FRESistance} Subsystem

This subsystem configures 2-wire resistance (RESistance) and 4-wire resistance (FRESistance) measurements.

RESistance measurements only supported on DAQM900A, DAQM901A, DAQM902A, and DAQM908A mul-

tiplexer modules.

FRESistance measurements only supported on DAQM900A, DAQM901A, and DAQM902A multiplexer mod-

ules.

Command Summary

[SENSe:]{RESistance|FRESistance}:APERture

[SENSe:]{RESistance|FRESistance}:APERture:ENABle

[SENSe:]{RESistance|FRESistance}:NPLCycles

[SENSe:]{RESistance|FRESistance}:OCOMpensated

[SENSe:]{RESistance|FRESistance}:POWer:LIMit[:STATe]

[SENSe:]{RESistance|FRESistance}:RANGe:AUTO

[SENSe:]{RESistance|FRESistance}:RANGe

[SENSe:]RESistance:ZERO:AUTO

Keysight DAQ970A/DAQ973A Programming Guide 239

2 SCPI Programming

Other manuals for Keysight Technologies DAQ970A