SENSe Subsystem
The SENSe subsystem configures measurements. The most basic SENSe command is [SENSe:]FUNCtion [:ON],
which selects the measurement function. All other SENSe commands are associated with specific measurement
types as following:
[SENSe:]DIGital
[SENSe:]CAPacitance Subsystem
[SENSe:]CURRent Subsystem
[SENSe:]{FREQuency|PERiod} Subsystem
[SENSe:]{RESistance|FRESistance} Subsystem
[SENSe:]STRain Subsystem
[SENSe:]TEMPerature Subsystem
[SENSe:]VOLTage Subsystem
[SENSe:]TOTalize Subsystem
Keysight DAQ970A/DAQ973A Programming Guide 223
2 SCPI Programming
To Next Page
Loading...
