Keysight Technologies DAQ970A User Manual

ACQuire3 Subsystem
ACQuire3 commands provide the way to configure channels for module digitizing. When you execute these com-
mands, the instrument uses default values for the requested measurement configuration.
ACQuire3 commands let you select the sample count and sample rate for module digitizing.
The ACQuire3 command does not place the instrument in the "wait-for-trigger" state. Use the INITiate3 command
in conjunction with ACQuire3 to place the instrument in the "wait-for-trigger" state.
These SCPIs are supported on the DAQM909A Digitizer module only.
Command Summary
ACQuire3?
ACQuire3:POWer:ANALysis
ACQuire3:STRain:QUARter
ACQuire3:STRain:HALF:BENDing
ACQuire3:STRain:FULL:BENDing
ACQuire3:STRain:HALF:POISson
ACQuire3:STRain:FULL:POISson
ACQuire3:STRain:FULL:BENDing:POISson
ACQuire3:VOLTage[:DC]
46
Keysight DAQ970A/DAQ973A Programming Guide
2 SCPI Programming

Keysight Technologies DAQ970A Specifications

General

Brand	Keysight Technologies
Model	DAQ970A
Category	Multiplexer
Language	English