Keysight Technologies DAQ970A User Manual

CALibration Subsystem
This subsystem is used to calibrate the Keysight DAQ970A/DAQ973A Data Acquisition System.
For further details on calibration procedures, see the
DAQ970A/DAQ973A Service Guide
. Please refer to
that guide before attempting to calibrate the instrument as improper use of the CALibration commands can
adversely affect the accuracy and reliability of the instrument.
To perform calibration, you must unsecure the instrument, or change the instrument's calibration code or
security code.
Command Summary
CALibration:ADC?
CALibration[:ALL]?
CALibration:COUNt?
CALibration:DATE?
CALibration:SECure:CODE
CALibration:SECure:STATe
CALibration:STORe
CALibration:STRing
CALibration:TEMPerature?
CALibration:TIME?
CALibration:VALue
82
Keysight DAQ970A/DAQ973A Programming Guide
2 SCPI Programming

Keysight Technologies DAQ970A Specifications

General

Brand	Keysight Technologies
Model	DAQ970A
Category	Multiplexer
Language	English