Keysight Technologies DAQ970A User Manual

Error code Error message
-171 Invalid expression
-178 Expression data not allowed
Execution Errors (-200...)
Error code Error message
-200 Execution error
-201 Invalid while in local
-203 Secure option: Instrument security is unlocked
-203 Command protected; License required
-203 Command protected"
-210 Trigger error
-211 Trigger ignored
-212 Arm ignored
-213 Init ignored
-213 INIT ignored
-214 Trigger deadlock
-215 Arm deadlock
-220 Parameter error
-221 Settings conflict; trigger source is BUS
-221 Settings conflict; trig source changed to IMM
-221 Settings conflict; scaling not allowed in current measurement function; CALC:SCAL:STAT OFF set
-221 Settings conflict; offset compensation not allowed with low power ohms; low power disabled
-221 Settings conflict; lower limit > upper limit
-221 Settings conflict; internal trigger not allowed in current measurement function; TRIG:SOUR IMM selected
-221 Settings conflict; channel removed from scan list
-221 Settings conflict; chan adv source changed to IMM
-221 Settings conflict; cannot delete state selected and enabled for automatic power-on recall
-221 Settings conflict; CALC:SCAL:REF 0.0 not compatible with CALC:SCAL:FUNC PCT; CALC:SCAL:STATE OFF set
-221 Settings conflict: state recall failed due to SOURce:MODE:LOCK conflict
-221 Settings conflict: one or more dependent measurement channels not in scan list; computed channel removed
-221 Settings conflict: module type does not match state
-221 Settings conflict: channel numbers for computed channel arguments must be lower than the computed channel number
-221 Settings conflict: cannot change DAC output mode when locked
-221 Settings conflict: DMM enabled
-221 Settings conflict: DMM enable changed
-221 Settings conflict: DMM disabled
Keysight DAQ970A/DAQ973A Programming Guide 353
3SCPI Error Messages

Keysight Technologies DAQ970A Specifications

General

Brand	Keysight Technologies
Model	DAQ970A
Category	Multiplexer
Language	English