Keysight Technologies DAQ970A - Sense3 Subsystem

SENSe3 Subsystem
These SCPIs are supported on the DAQM909A Digitizer module only.
Command Summary
SENSe3:FILTer:MODE
SENSe3:FUNCtion
SENSe3:STRain:EXCitation
SENSe3:STRain:GFACtor
SENSe3:STRain:POISson
SENSe3:STRain:UNSTrained
SENSe3:STRain:UNSTrained:IMMediate
SENSe3:STRain:VOLTage:RANGe
SENSe3:VOLTage:RANGe
Keysight DAQ970A/DAQ973A Programming Guide 283
2 SCPI Programming