4- 16 Keysight E5260/E5270 Programming Guide, Edition 4
Command Reference
Command Reference
Command Reference
This section contains detailed descriptions of all GPIB commands. The commands
are listed in alphabetical order. Each entry:
1. Defines one GPIB command
2. Describes the execution conditions, if any exist
3. Describes the syntax
4. Lists the parameters
5. Shows the query response after command execution, if there is a query
command
6. Explains any additional information
7. Provides examples
The following conventions are used in this section.
parameter Required command parameters, for which you must substitute a
value or variable.
[parameter] Optional command parameters, for which you may substitute a
value or omit it.
To Next Page
Loading...
Need help?
General
