Getting Started Guide 103
Test Platform Operating System
Updating the Keysight 5G NR Test Application
Once the application software has been installed, you must follow the
instructions provided in “Licensing” on page 35 in order to install the license
required (if not previously installed), and select and start up the application as
described in the procedure “Turning On the Test Platform the First Time” on
page 30.
Installation of Third Party Software
It is recommended that you do not install any non-approved software on the
UXM 5G. Installation of third party software on the UXM 5G may render the
system inoperative and is not supported by Keysight Technologies.
To Next Page
Loading...
