Keysight PXIe Chassis Family User Guide 149
Performing a Chassis Self Test Chassis Maintenance
544 Previous firmware update on Chassis Manager Firmware is not complete, please rerun firmware update again to
complete the operation.
545 Previous firmware update on Chassis Manager Firmware is not complete, please rerun firmware update again to
complete the operation.
546 Previous firmware update on PCIe Switches is not complete, please rerun firmware update again to complete the
operation.
547 Previous firmware update on Trigger CPLD is not complete, please rerun firmware update again to complete the
operation.
548 Error found while reading dirty byte.
549 Chassis Manager operating on Gen 1 fabric switch image. DIP switch 2 is flipped to on.
550 Monitor Process Software is operating on backup (read-only) firmware image. See Keysight Technical Support.
999
“Too many self-test codes generated, aborting.”
Table 10 High-numbered self test codes (continued)
To Next Page
Loading...