76 Keysight PXIe Chassis Family User Guide
Chassis Cooling and Rack Mounting Rack Mounting the Chassis
Rack Mount Accessory Kits
Chassis rack mount accessory kits provide system design flexibility. The following
kits can be mix-and-matched to suit the needs of a given application:
For the M9018B and M9019A chassis:
– Y1215C Flush Mount Rack Kit: Complete kit including rack flanges, handles,
and attachment hardware. The kit suspends the chassis in a Keysight rack
using only 4U of rack space. Rack rails may be needed in a non-Keysight
rack.
– Y1216B Recess Mount Rack Kit: Complete recess-mount kit including rack
flanges, handles, and attachment hardware. The kit recesses the chassis
by 4 inches and suspends the chassis in a Keysight rack using only 4U of
rack space. Rack rails may be needed in a non-Keysight rack.
– Y1217B Rack Mount Rail Kit: This optional kit provides additional stability to
the chassis when rack-mounted. When using rails, the chassis will require
5U of rack space. Rails may not fit in a non-Keysight rack.
– Y1218A Cable Tray Kit: Adds a 1U high cable tray to the chassis and includes
cable tray, feet for using the chassis/tray on a table, and attachment
hardware.
For the M9010A chassis:
– Y1271A Flush Mount Rack Kit: Complete kit including rack flanges, handles,
and attachment hardware. The kit suspends the chassis in a Keysight rack
using only 4U of rack space. Rack rails may be needed in a non-Keysight
rack.
To Next Page
Loading...