6 Performance Tests and Calibration
176 Keysight U1251B and U1252B User’s and Service Guide
Calibration Errors
The following errors indicate failures that may occur during a calibration.
Table 6-5 Calibration error codes and their respective meanings
Error Code Description
200 Calibration error: Calibration mode is secured
002 Calibration error: Secure code invalid
003 Calibration error: Serial number code invalid
004 Calibration error: Calibration aborted
005 Calibration error: Value out of range
006 Calibration error: Signal measurement out of range
007 Calibration error: Frequency out of range
008 EEPROM write failure
To Next Page
Loading...
