2 Making Measurements
54 Keysight U1251B and U1252B User’s and Service Guide
Measuring Current
μA & mA measurement
Set up the multimeter to measure μA and mA as shown in Figure 2-3. Probe the
test points and read the display.
NOTE
– Press if necessary to ensure is shown on the display.
– For A measurement, set the rotary switch to , and connect the
positive test lead to A.mA.
– For mA measurement, set the rotary switch to , and connect
the positive test lead to A.mA.
– For A (ampere) measurement, set the rotary switch to , and
connect the positive test lead to A.
– Press to display dual measurements. See Table 1-8 of “Selecting
display with the Dual button” on page 42 for a list of dual measurements
available.
To Next Page
Loading...
