Functions and Features 3
Keysight U1251B and U1252B User’s and Service Guide 93
Reviewing logged data
1 Press for more than 1 second to enter the Log Review mode. The last
recorded entry and the last logging index are displayed.
2 Press to switch between hand (manual) and interval (automatic)
logging review mode.
3 Press to ascend or to descend through the logged data. Press to
select the first record and press to select the last record for quick
navigation.
4 Press for more than 1 second at the respective Log Review mode to
clear logged data.
5 Press for more than 1 second to exit mode.
6 During the data review in either manual or interval logging mode, press
for more than one second to clear all the logged values.
To Next Page
Loading...
