3 Fonctionnalités
82 Keysight U1251B et U1252B Guide d’utilisation et de maintenance
Figure 3-3 Refresh hold mode operation
REMARQUE
– For voltage and current measurements, the holding value will not be updated
if the reading is below 500 counts.
– For resistance and diode measurements, the holding value will not be
updated if the reading is in “OL” (open state).
– The holding value may not be updated when the reading does not reach a
stable state for all measurements.
The HOLD sign
flashes until the
measured value is
stable and updated
Press
Measurement is
updated
to return
Press
Variation counts setting
To Next Page
Loading...
