Keysight x-series Getting Started And Troubleshooting

3 Instrument Operating System
This chapter describes the Microsoft Windows 7, configuration and the settings used
with the Keysight instrument software. It includes information about changing some of
the system settings. And it describes the Windows operating system configuration and
the software installations that are present on the Disk Drive when the instrument
leaves the factory.
It is possible to use the front panel and touchscreen for changing operating system
configuration items, but it is easier to perform these tasks with a USB mouse and
external keyboard. For more useful shortcuts, see"Navigating Windows Without a
Mouse" on page 58.
The following topics can be found in this chapter:
"Microsoft Windows" on page 32
"Installed Software" on page 33
"Customer Installation of Software" on page 34
"User Accounts" on page 35
"Keysight X-Series Analyzer Licensing Options" on page 37
"Licensing New Measurement Application Software - " on page 38
"Windows Configuration" on page 40
"Configure Printers" on page 43
"Configuring LAN" on page 44
"Windows Security" on page 46
"System Maintenance" on page 48
"USB Connections" on page 49
"Disk Drive Partitioning and Use" on page 50
"Disk Drive Recovery Process" on page 52
Keysight X-Series Signal Analyzer
Getting Started and Troubleshooting Guide
31

Keysight x-series Specifications

General

Analysis Bandwidth	Up to 1 GHz (depending on model)
Real-Time Bandwidth	Up to 1 GHz (depending on model)
Form Factor	Benchtop
Connectivity	LAN, USB, GPIB
Resolution Bandwidth	1 Hz to 10 MHz (depending on model)